Why Does My Invisible Fence Keep Beeping?

Why Does My Invisible Fence Keep Beeping?

The constant invisible fence backup battery beeping can be pretty irritating. Read this complete guide to understand why this happens.

SHARE: icon-facebook icon-pinterest icon-twitter

Invisible fences for dogs can be an excellent way for you to let your dog enjoy some fresh air outside without the fear of it running away. They are less expensive and require less regulation than installing traditional fences too. In addition, they have high adaptability since they can be installed easily in all types of yards despite hilly spots, water, wooded areas. Plus, since they are invisible, you don’t have to worry about how the fence affects your home’s curb appeal. 

Electric invisible fences can also be installed far more quickly than conventional fences. There are plenty of smart dogs that can outmaneuver traditional fences by digging under, climbing over, or chewing through the fence.

However, most people are concerned with these fences because they beep incessantly, even if the dog doesn’t go past the set perimeter. So, why does this keep happening?

Here is a complete guide on your new fence, including why the invisible fence backup battery beeping keeps happening without a visible cause. 

1. Why Does My Invisible Fence Keep Beeping?

If the invisible fence in your yard keeps beeping continuously, there could be some internal issues that you may not know about. For example, the invisible fence’s control panel beeping may happen due to a wire break somewhere along the fence. In addition, if the invisible fence backup battery beeping happens with a pause in between the beeps, it can indicate that the backup battery should be replaced. 

2. How to Reset the Invisible Fence Transmitter?

Resetting your invisible fence system can sometimes be as simple as replacing the transmitter batteries. Ensure to bring your dog inside the house and switch off the power to the fence before you attempt this. Unplug your transmitter, too, before changing the batteries. If it’s not the batteries, some stray metal object obstructs the transmission, so such objects should also be removed. 

3. How to Stop an Invisible Fence from Beeping?

If you cannot figure out how to do it on your own, you should call a service to do it for you. There are plenty of local service providers that will be happy to assist you in this manner. However, don’t delay it too much since the beeping may indicate problems with the fence that may result in your dog running away. 

4. How to Check If the Invisible Fence Is Working?

Depending on the invisible fence you’re using, there may be a battery tester system that came along in the package. You should place the tester on the collar and try and walk past the boundary of the wire. If you hear an audible warning sound from the collar and the battery tester’s lights turn on, it can mean the battery is still functioning correctly. On the other hand, if the sound comes from the collar, but the light doesn’t flash, it means you need to replace the battery. 

5. What Does a Green Blinking Light Mean for Invisible Fences?

The green blinking light is reassurance that the fence is working. If the underground invisible dog fence has some wire break, the green blinking light will go out, and you will also hear a warning sound from the fence. This is because the signal to the light is affected by the digital range of the transmitter’s control panel that creates signal fields on every side of the wires. 

6. How to Find Wire Breaks in Your Invisible Fence?

Having the alarm beep continuously might indicate that there is a problem with the transmitter or wires. To check which of the components are malfunctioning, you can follow these steps. Two wires run from the perimeter fence to your transmitter. You will have to disconnect the transmitter from the wires and then put a small wire piece or the end of the paper into the jack where you have disconnected the wires. If this makes the beeping stop, it implies that the transmitter is operating perfectly but there is a problem with the wire. On the other hand, if the alarm doesn’t stop, it means that the transmitter is busted. 

7. What Frequency Do Invisible Fences Work On?

Invisible fences operate on a radio carrier frequency of 10.8 kHz and 7.5 kHz with a modulation frequency of 30 Hz. 

8. Do Invisible Fences Next Door Interfere with Your Fence?

Yes, if there is an invisible fence at your neighbor’s house, it might interfere with yours too and vice versa. 

9. Why Is the Collar Beeping but Not Shocking?

There could be a problem with the dog’s receiver collar that is preventing the shock. You should touch both the points on your receiver when the collar is beeping to check it. This will let you know whether the collar is working or not. 

10. How to Check the Battery of the Invisible Fence?

If the invisible fence backup battery beeping continues, you should check the battery too. You can check the battery through this step-by-step process. 

  1. Remove the receiver collar from your pet 
  2. Carry the collar into the boundary area and listen for any audible sounds from the collar 
  3. If the collar beeps, it means that the battery is working. 

11. How to Reset the Collar?

You can easily resynchronize the wireless fence system through the following steps:

  1. Remove your pet’s receiver collar.
  2. Take the battery out of the collar.
  3. Move the switch for the boundary in the transmitter to high from the low position.
  4. Start to adjust the boundary controller dial slowly to the 8th setting, then down to the 1st setting, and then back to the recommended setting. 

We hope you have now learned why the invisible fence backup battery beeping occurs and how to prevent it.